VM2018A (Copy)


    • The column and the beam were intergraded together to provide the best dynamic rigidity and precision stability.


    • The worktable’s length wise is parallel to the beam, create the most suitable length-width ratio.


    • The spindle was driven by dual gear box from Europe, make sure it has the quickest response time and the lowest vibration.


    • Extra long X axis travel, easy for customer to add attachment head , extend the working range.


    • Unique opposite angle two door design with foot rest aside of the worktable makes load and unload the work piece much easier.


    • German made hanging type operation box with protecting door on the right side, easy for operation and tool change.


    • Equipped with fully automatic coil type and chain type chip conveyer. Chip collecting point is located at the back of the machine. Efficient, environmental friendly and clean.


    • The machine is operated via an operator’s panel, designed by Sky Master and made in Taiwan.


Machine specifications and technical parameters:

Item Unit VM2018A VM2018B
Controller FANUC 0i MF FANUC 0i MF
Travel X Axis Travel (work table) mm 2300 2300
Y Axis Travel (saddle) mm 2000 2000
Z Axis Travel (spindle) mm 800 800
Distance from Spindle Nose to Table mm 180-980 180-980
Distance from Spindle Center to Column Cover mm 1840 1840
Work table Table Size (length×width) mm 2300×1600 2300×1600
Max. table Load kg 8000 8000
T Slot Size(width×distance×quantity) mm 22×180×8 22×180×8
Spindle Spindle taper BT50 BBT50
Max. spindle speed rpm 6000(direct driven) 10000(direct driven)
Spindle motor power (continual working 30 mins) kW 22/26 22/26
Spindle motor torque N.m 560/662 140/165
X/Y/Z Rapid speed (X/Y) mm/min 20000 20000
Rapid speed (Y) mm/min 20000 20000
Rapid speed (Z) mm/min 15000 15000
Cutting feed rate (X/Y/Z) mm/min 1~10000 1~10000
ATC(Option) ATC type Arm type Arm type
Tool capacity pcs 32 32
Max. tool diameter mm φ110/φ225 φ110/φ225
Max. tool length mm 350 350
Max. tool weight kg 20 20
Accuracy VDI/DGQ3441 Full travel positioning accuracy mm P0.020 P0.020
Repeatability accuracy mm Ps0.015 Ps0.015
Air pressure MPa 0.6~0.8 0.6~0.8
Air pressure 3/PE、AC380V、50Hz 3/PE、AC380V、50Hz
Supply voltage & frequency kVA 60 60
Machine size (length×width×height) mm 7027×5217×4339 7027×5217×4339
Machine weight kg 22000 22000
※ We reserve the right to change technical parameter for improvement of our products without giving notice to customers

Configuration table:

Configuration VM2018A VM2018B
FANUC 0i MF absolute type
Ethernet DNC machining
AICC II, fine mould package, machining condition selecting
Rigid tapping
Full enclosed splash guard
6000RPM BT50 spindle ×
Direct dirven spindle 10000rpm BBT50 ×
Spindle air sealing
Air blowing device
Working area light
3 colors warming light
Electric cabinet heat exchanger
Portable MPG
Coolant system
Lubrication system/Pneumatic system
Adjustable level bolts and foundation Blocks
Coilchip conveyor
Chain chip conveyor
Tool box
Air gun/Water gun flushing function
Automatically power off
Spindle chiller
BF gear box ×
Z axis travel change to 1m
Full-enclosed splash guard with top cover
Column rise 200mm
Column rise 300mm
Arm type ATC
3D coordinate system rotation
Oil-feed tool shank port
Coolant through spindle center ×
4th & 5th axis
linear scale
Measuring system (tool, workpiece)
Attachment milling head ×
Rotation storage for attachment head ×
3 axis thermal compensation
Electric cabinet AC
Voltage stabilizer
●Standard ○Option ×Not available